762 research outputs found
Instrumental and Analytic Methods for Bolometric Polarimetry
We discuss instrumental and analytic methods that have been developed for the
first generation of bolometric cosmic microwave background (CMB) polarimeters.
The design, characterization, and analysis of data obtained using Polarization
Sensitive Bolometers (PSBs) are described in detail. This is followed by a
brief study of the effect of various polarization modulation techniques on the
recovery of sky polarization from scanning polarimeter data. Having been
successfully implemented on the sub-orbital Boomerang experiment, PSBs are
currently operational in two terrestrial CMB polarization experiments (QUaD and
the Robinson Telescope). We investigate two approaches to the analysis of data
from these experiments, using realistic simulations of time ordered data to
illustrate the impact of instrumental effects on the fidelity of the recovered
polarization signal. We find that the analysis of difference time streams takes
full advantage of the high degree of common mode rejection afforded by the PSB
design. In addition to the observational efforts currently underway, this
discussion is directly applicable to the PSBs that constitute the polarized
capability of the Planck HFI instrument.Comment: 23 pages, 11 figures. for submission to A&
Cosmological Parameters from the 2003 flight of BOOMERANG
We present the cosmological parameters from the CMB intensity and
polarization power spectra of the 2003 Antarctic flight of the BOOMERANG
telescope. The BOOMERANG data alone constrains the parameters of the
CDM model remarkably well and is consistent with constraints from a
multi-experiment combined CMB data set. We add LSS data from the 2dF and SDSS
redshift surveys to the combined CMB data set and test several extensions to
the standard model including: running of the spectral index, curvature, tensor
modes, the effect of massive neutrinos, and an effective equation of state for
dark energy. We also include an analysis of constraints to a model which allows
a CDM isocurvature admixture.Comment: 18 pages, 10 figures, submitted to Ap
A Measurement of the Angular Power Spectrum of the CMB Temperature Anisotropy from the 2003 Flight of Boomerang
We report on observations of the Cosmic Microwave Background (CMB) obtained
during the January 2003 flight of Boomerang . These results are derived from
195 hours of observation with four 145 GHz Polarization Sensitive Bolometer
(PSB) pairs, identical in design to the four 143 GHz Planck HFI polarized
pixels. The data include 75 hours of observations distributed over 1.84% of the
sky with an additional 120 hours concentrated on the central portion of the
field, itself representing 0.22% of the full sky. From these data we derive an
estimate of the angular power spectrum of temperature fluctuations of the CMB
in 24 bands over the multipole range (50 < l < 1500). A series of features,
consistent with those expected from acoustic oscillations in the primordial
photon-baryon fluid, are clearly evident in the power spectrum, as is the
exponential damping of power on scales smaller than the photon mean free path
at the epoch of last scattering (l > 900). As a consistency check, the
collaboration has performed two fully independent analyses of the time ordered
data, which are found to be in excellent agreement.Comment: 11 pages, 7 figures, 3 tables. High resolution figures and data are
available at http://cmb.phys.cwru.edu/boomerang/ and
http://oberon.roma1.infn.it/boomerang/b2
Searching for non Gaussian signals in the BOOMERanG 2003 CMB maps
We analyze the BOOMERanG 2003 (B03) 145 GHz temperature map to constrain the
amplitude of a non Gaussian, primordial contribution to CMB fluctuations. We
perform a pixel space analysis restricted to a portion of the map chosen in
view of high sensitivity, very low foreground contamination and tight control
of systematic effects. We set up an estimator based on the three Minkowski
functionals which relies on high quality simulated data, including non Gaussian
CMB maps. We find good agreement with the Gaussian hypothesis and derive the
first limits based on BOOMERanG data for the non linear coupling parameter f_NL
as -300<f_NL<650 at 68% CL and -800<f_NL<1050 at 95% CL.Comment: accepted for publication in ApJ. Letter
Alumosilicate ceramic proppants based on natural refractory raw materials
The sintering-strengthening effect of the additions of the highly ferrous bauxite (with Fe[2]O[3] content of 20-25 % in the calcined state) in the compositions with refractory clays was established. It was found that in the temperature range 1350-1500°C the additions of bauxite in amounts of 10-40% have a fluxing effect due to the iron oxide introduced with bauxite in compositions with clay. An increasing the bauxite additive in the amount of 50-70% ensures its strengthening effect by increasing the total content of the mullite of the prismatic habit in the firing products of composites with clay. Preliminary clay and bauxite calcination at 900 °С and an increase in the content of bauxite additive up to 50-70% in compositions with clay allow to produce aluminosilicate proppants with a bulk density of 1.62-1.65 g/сm{3} and compressive strength up to 52 MPa
Development and characterization of the readout system for POLARBEAR-2
POLARBEAR-2 is a next-generation receiver for precision measurements of the
polarization of the cosmic microwave background (Cosmic Microwave Background
(CMB)). Scheduled to deploy in early 2015, it will observe alongside the
existing POLARBEAR-1 receiver, on a new telescope in the Simons Array on Cerro
Toco in the Atacama desert of Chile. For increased sensitivity, it will feature
a larger area focal plane, with a total of 7,588 polarization sensitive
antenna-coupled Transition Edge Sensor (TES) bolometers, with a design
sensitivity of 4.1 uKrt(s). The focal plane will be cooled to 250 milliKelvin,
and the bolometers will be read-out with 40x frequency domain multiplexing,
with 36 optical bolometers on a single SQUID amplifier, along with 2 dark
bolometers and 2 calibration resistors. To increase the multiplexing factor
from 8x for POLARBEAR-1 to 40x for POLARBEAR-2 requires additional bandwidth
for SQUID readout and well-defined frequency channel spacing. Extending to
these higher frequencies requires new components and design for the LC filters
which define channel spacing. The LC filters are cold resonant circuits with an
inductor and capacitor in series with each bolometer, and stray inductance in
the wiring and equivalent series resistance from the capacitors can affect
bolometer operation. We present results from characterizing these new readout
components. Integration of the readout system is being done first on a small
scale, to ensure that the readout system does not affect bolometer sensitivity
or stability, and to validate the overall system before expansion into the full
receiver. We present the status of readout integration, and the initial results
and status of components for the full array.Comment: Presented at SPIE Astronomical Telescopes and Instrumentation 2014:
Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for
Astronomy VII. Published in Proceedings of SPIE Volume 915
Measuring CMB Polarization with BOOMERANG
BOOMERANG is a balloon-borne telescope designed for long duration (LDB)
flights around Antarctica. The second LDB Flight of BOOMERANG took place in
January 2003. The primary goal of this flight was to measure the polarization
of the CMB. The receiver uses polarization sensitive bolometers at 145 GHz.
Polarizing grids provide polarization sensitivity at 245 and 345 GHz. We
describe the BOOMERANG telescope noting changes made for 2003 LDB flight, and
discuss some of the issues involved in the measurement of polarization with
bolometers. Lastly, we report on the 2003 flight and provide an estimate of the
expected results.Comment: 12 pages, 8 figures, To be published in the proceedings of "The
Cosmic Microwave Background and its Polarization", New Astronomy Reviews,
(eds. S. Hanany and K.A. Olive). Fixed typos, and reformatted citation
The bolometric focal plane array of the Polarbear CMB experiment
The Polarbear Cosmic Microwave Background (CMB) polarization experiment is
currently observing from the Atacama Desert in Northern Chile. It will
characterize the expected B-mode polarization due to gravitational lensing of
the CMB, and search for the possible B-mode signature of inflationary
gravitational waves. Its 250 mK focal plane detector array consists of 1,274
polarization-sensitive antenna-coupled bolometers, each with an associated
lithographed band-defining filter. Each detector's planar antenna structure is
coupled to the telescope's optical system through a contacting dielectric
lenslet, an architecture unique in current CMB experiments. We present the
initial characterization of this focal plane
- …